Product ID:160321 HARDENER PRO-PLUG BALL PLUGGING HARDENER
MSDS Date:07/15/1992
FSC:8030
NIIN:00F031784
Kit Part:Y
MSDS Number: BSPCZ

Emergency Phone: 708-234-8100/800-255-3924

Info Phone: 708-234-8100/813-979-0626(COLLECT)

Cage: 60443

Telephone: (708) 234-8100

Cage: 60443

MODIFIED POLYAMINE

8.5

RTECS: 9999999WG

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MODERATE IRRITATION & TRANSIENT
CORNEAL INJURY. SKIN: IRRITATION & SENSITIZATION. ABSORPTION.
Explanation of Carcinogenicity:NONE

First Aid:INGESTION: DON'T INDUCE VOMITING. GIVE LARGE AMOUNTS OF MILK
OR WATER. TRANSPORT TO MEDICAL FACILITY. NEVER GIVE ANYTHING BY
MOUTH IF UNCONSCIOUS. INHALATION: REMOVE TO FRESH AIR. EYE:
IRRIGATE IMMEDI ATELY W/WATER FOR AT LEAST 30 MINS. SKIN: WASH OFF
SOAP & WATER REPEATEDLY UNTIL AREA IS COMPLETELY CLEANED. OBTAIN
MEDICAL ATTENTION IN ALL CASES. SEE SUPP

Flash Point Method:PMCC
Flash Point:>200F
Extinguishing Media:CO2, ALL PURPOSE DRY CHEMICAL OR FOAM
Fire Fighting Procedures:WEAR SCBA. WATER MAY BE INEFFECTIVE, BUT MAY
BE USED TO COOL EXPOSED CONTAINERS TO PREVENT PRESSURE BUILD-UP &
POSSIBLE AUTOIGNITION, OR EXPLOSION DUE TO HEAT.
Unusual Fire/Explosion Hazard:CONTAINERS MAY BUILD-UP PRESSURE,
AUTOIGNITION, OR EXPLODE WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:USE RESPIRATOR/EYE/HAND/BODY PROTECTION
APPROPRIATE FOR THE SIZE OF SPILL & EXPOSURE ENCOUNTERED. LARGE:
DIKE & CONTAIN USING INERT ABSORBENT & COLLECT IN SUITABLE
CONTAINERS FOR PROPER DISPOSAL. REMO VE RESIDUE W/HOT SOAPY WATER.

Handling and Storage Precautions:PERIODS OF EXPOSURE TO HIGH TEMPS
SHOULD BE MINIMIZED. PROTECT FROM MOISTURE CONTAMINATION WHICH MAY
CAUSE EXOTHERMIC GENERATION OF CO2.
Other Precautions:DON'T TAKE INTERNALLY. KEEP CONTAINER TIGHTLY CLOSED.
EMPTY CONTAINERS MUST NOT BE WASHED & REUSED FOR ANY PURPOSE. STORE
IN COOL DRY LOCATION. AVOID INHALATION OF VAPORS/MIST.

Respiratory Protection:USE POSITIVE PRESSURE AIR-SUPPLIED RESPIRATOR,
NIOSH APPROVED.
Ventilation:MECHANICAL PREFERRED
Protective Gloves:IMPERMEABLE
Eye Protection:SAFETY GLASSES & CHEMICAL SPLASH GOGGLES
Other Protective Equipment:EYE WASH FACILITY, SAFETY SHOWER
Work Hygienic Practices:WASH THOROUGHLY W/SOAP & WATER AFTER HANDLING.
REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
USE EXTRA CARE W/SHOES (DESTROY CONTAMINATED SHOES). NO SPECIFIC
ANTIDOTE. SUPPORTIVE CARE. ANY TREATMENT THAT MIGHT BE REQUIRED FOR
OVEREXPOSURE SHOULD BE DIRECTED AT THE CONTROL OF SYMPTOMS & CLINIC
AL CONDITIONS.

Spec Gravity:1.02
Solubility in Water:COMPLETE
Appearance and Odor:LIGHT YELLOW LIQUID W/AMINE ODOR.

Stability Indicator/Materials to Avoid:YES
ACID, CHLORINATED HYDROCARBONS, & STRONG BASES
Stability Condition to Avoid:HIGH TEMPERATURE, HUMIDITY, & OTHER
SOURCES OF IGNITION, MOISTURE
Hazardous Decomposition Products:CO, CO2, ALDEHYDES, NITROGEN OXIDES, &
AMMONIA
Conditions to Avoid Polymerization:EPOXY RESIN IN MASSES OF 1
POUND/MORE OF PRODUCT, HEAT, HIGH TEMPERATURE, OTHER IGNITION
SOURCES.

Waste Disposal Methods:DISPOSE IN ACCORDANCE W/FEDERAL, STATE, & LOCAL
REGULATIONS. AS PRODUCED, THIS PRODUCT ISN'T WASTE. IF DISCARDED AS
IS, IT ISN'T CLASSIFIED A HAZARDOUS WASTE UNDER RCRA. PREVENT
CONTAMINATION OF SEWER S/GROUND WATER/STREAMS. CORROSIVE. UN1760.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.